Tag Archives: bracelets

Journal: 16 March 2015

Things I have been up to lately

Things I have been up to lately

Since my last post, I: finished the mitts with my Christmas-present yarn, made a few new tatted bracelets, finished plying my hand-spun yarn, started knitting a shawl(ette) with it, chugged away on my Sierpinski blanket and my big green scarf, dyed some things, and did a bunch of mending that really needed to be done but ate into my creative crafting time.

The mitts are pictured above; not much to say on the topic. I’m pretty pleased with how they came out, mostly because of how warm and soft/smooth the yarn is.

Bracelets:

Two of them are this pattern, and the one in the middle is a pattern I’ve yet to post. I’ve been playing with color a bit; I’m really pleased with how the blue/yellow one turned out but less pleased with the blue/black one.

I finished plying my handmade yarn, and am pleased to report that the three-plying method using long crochet-like chains worked really well. I almost immediately cast on a knitting project with the yarn: a top-down triangular shawl based on this (knitting fool link) lace stitch. I’m hoping that I’ll have enough for a reasonable shawl/shawlette; I was too excited about casting on to bother with details like measuring out my yardage. I’m working from the outside (gray) in (towards purple), despite winding the yarn in a center-unwinding ball. Partly this is because of the colors and partly because my spinning gauge was still totally inconsistent, meaning the purple end is considerably thinner than the gray. I’m hoping it’ll look nice and like the shawl is fading prettily away, and not get all warped and sad and look like I am bad at spinning. We’ll see; wish me luck! Photos:

tea_dye

Dyed tatting, with reference pieces

I conducted a dyeing experiment using tea on some tatted things; shown at right are the tatted bit I dyed purple a few weeks ago, three bits I stained with tea, and bracelets made of the same thread and undyed to serve as a color reference. The tan one, of course, started out white. Not much happened; the tan of the formerly white one is reasonably lovely, the rainbow is a little less intense, and the “ocean” colorway thread just turned muddy. My verdict is I may do this to white pieces but should probably stop overdyeing things that already have color to them.

Sad re-dyed shirt

Sad re-dyed shirt

Speaking of which, after my rather successful re-dyeing of a shirt discussed in my last post, I was pretty confident and ready to dye my blue patchwork shirt that also got pink-splotched in the same wash load. I’m heartily disappointed in the results, shown at right; I think it’s obvious that it was amateurishly dyed over, it’s terribly splotchy right in the center front, and it just doesn’t look very good. I haven’t even had the heart to try it on and preen in front of a mirror yet, which is a bad old sign. I’m going to at least try it on, and depending how I’m feeling may pick up some black dye and see what happens, but as like as not will just throw it out (or leave it in my dresser to slowly migrate to the bottom of a drawer in shame). Ah well; fortunately I picked up some nice blue fabric at the store to make a new patchwork shirt, once I get through my backlog of sewing.

In more happy news, my Sierpinski blanket is coming along well and is over half-finished; photo:

Sierpinski blanket in progress

Sierpinski blanket in progress

Advertisements

Journal: 22 February 2015

Homemade yarn

Homemade yarn, just beginning the plying process

It’s been a bit of a while since I posted—I blame my busy social calendar and regret nothing—so I’ve got a fair bit to share with y’all today.

Yesterday I had a really good crafting day: I successfully re-dyed a shirt that had gotten pinked in an Unfortunate Laundry Incident, as well as playing with dyeing tatted pieces. I worked a little bit on the blouses I’m assembly-line-ing, and had good luck with my serger. I also had good luck with plying my home-spun wool; I came up with a way to make the colors work out and it’s looking like real yarn now.

I’ve also done a fair bit of tatting in the past month, started and nearly finished a pair of mitts out of my Christmas present yarn, and chugged away on the blanket and scarf I talked about in my last journal post. The blanket is now about halfway done, hooray hooray, and I’ve picked up enough yarn to finish the scarf.

In tatting news, I did a bit of design, both yesterday’s pattern and a modification of this pattern that I like rather better but is fiddlier to do (I intend to post a pattern for it in a bit). I’ve been playing with variegated thread, reproducing the beautiful bracelet that I made as a gift and failed to take pictures of, among others. I also made a butterfly bracelet with beading, which worked well. Photos:

Stripey mitts

Stripey mitts

The mitts are pretty straightforward double-crochet spiral things. I am striping them in the two yarn colors, with the interface between stripes being alternating stitches of the different colors. I’m pretty pleased with the starting row—I chained along the length of my hand, then chained back putting a treble crochet every third stitch to make four separate finger holes. The yarn is bamboo/wool, so very soft and warm, and it’s thicker gauge than I usually work with so the mitts are going quite fast and coming out bulky and lovely. I made the two mitts have opposite colors—red on top vs. gray on top—on purpose, in case you’re wondering.

Opposite colors

Opposite colors

I did intend to learn broomstick lace crochet with this yarn, and I tried to make a pair of mitts that way, with the first row of lace holes being the finger holes. Suffice to say broomstick lace in the round is tricky and not for beginners with improvised tools. So I ripped that out and started again with ordinary crochet. I do want to do broomstick lace at some point—probably the next time I have yarn that’s begging to be a scarf. I did learn that the packaging for a zipper makes a pretty decent flexible “broomstick”, for whatever that’s worth.

Sewing table with serger

Sewing table with serger

In sewing news, I picked up some fabric a while ago and it has been patiently waiting to be turned into blouses. I finally cut it this week—stacking all three pieces of folded fabric and cutting together, so let’s hope I don’t find any wrinkles—and hauled out the serger yesterday. I was, let’s say, pleasantly stunned to find that this old beast was still in good working order, threaded (!) in the correct color for two of the blouses (!!) and had good tension settings for the fabric (!!!). I was expecting to chew through quite a bit of scrap fabric getting it into that state, as the last time I recall having the machine out it was not doing so well on any of those counts. Evidently I either a) have completely forgotten the last time I used it, or b) have an infestation of wonderful. wonderful sewing-machine-mending gnomes in my house. At this point I can’t even think of any project I’ve made that would’ve used the serger and blue thread, so I’m leaning towards explanation b.

Lovely serged seam

Lovely serged seam

At any rate I am pleased with how the serger is doing. I tend to think of it as for knits only, but I’ve been irritated with the thick seams on the other blouses I’ve made, so I decided to give it a go. I’m a little nervous about a few things—the measurement of the seam allowance on curves, for one, since the knife and needles are fairly far apart and the guideline is at the location of the knife; I’m also worried about fitting the very different curves on the front princess seams, since I have to take the pins out at the knife point and hope the fabric stays in place until the needle. I guess that’s what the foot is for and I should just trust it. Wish me luck!

In dyeing news, I had an Unfortunate Laundry Incident a while ago where a non-colorsafe red thing pink-blotched two of my favorite shirts (the patchwork ones), plus a shirt I didn’t care about as much, a bathroom rug, my nice gray sweatpants, and so on. Two of the affected shirts were blue, so I decided to pick up some purple RIT dye and see if I could remediate them that way. I’m pleased to say it worked on the one I cared less about, and used only half the dye, so next time I have a good chunk of free time I think I will try it on the blue patchwork one. Not sure what to do about the brown shirt, unfortunately. Plus, while I had the dye out, I dyed a test bit of tatting just to see how it would do. The results are lovely, meaning I suddenly have a lot of options for all this white thread I have around. Photos:

The color is a little blotchy/uneven, but it looks a lot more deliberate than the single pink splotch it had before. I’m hoping it’ll be even less noticeable on the patchwork shirt, which is made of patterned fabric and is lighter-weight than this one, making it easier to dye evenly in my little basin. I’m particularly pleased with how similar the coloring is between the shirt and the lace bits, considering they’re made out of different fibers and all; I was prepared to have to snip the lace off if it didn’t work well. I did learn one interesting thing: slight deodorant stains make the fabric pick up more (purple, RIT-brand) dye than it would otherwise; hopefully not by a noticeable amount when it’s worn.

3-plying setup with crochet hook.

3-plying setup with crochet hook.

Last but far from least, I am thrilled to report that plying the homespun wool is going well. I had been planning on 2-plying it, matching end to end and working towards the center, making the yarn be multicolor at every point. I tried that. It looked terrible. So I laboriously un-plied the few yards I had done and tucked the thread away for a while to think about what it had done. Eventually I came up with a brilliant idea: 3-ply the sucker, working in crochet-like chains, making each section of yarn be all one color. It’s going really well: I love the colors of the yarn, and 3-ply brings me a lot closer to the sock-weight store-bought yarn I’d like to use it with. I’ll report again once I get more of it plied, but am really pleased so far.

Journal: Back from hiatus edition

Hello, internet. It’s been a while. As promised, now that I’m mostly settled in from the big move, I’m back! Not too unexpectedly, I didn’t get too terribly much crafting done, what with most of my WIPs being in boxes and that whole full-time job thing. However, there were some long flights and a holiday in there, so I have some things to report.

So close!

So close!

Mostly I’ve been chugging along on my spinning, and I am getting so close to the end of the roving. I am pretty excited about that—spinning was a new adventure, and I regret nothing, but until/unless I get a fiber farm and a spinning wheel, it is not going into my set of regular hobbies. I’ve also picked up some gray yarn that I think will complement my hand-spun yarn, with the intent of making a gray shawl with a big color block in it. I’ll keep y’all posted as that progresses, for sure.

bracelets_jan15I’ve made a bunch of tatted bracelets, some as gifts and some simply as something to do on airplanes and such. I am kicking myself for not taking a picture of one of the gift ones, as I think it’s the most beautiful one I’ve made to date; I’m planning to make another like it for myself at some point, though, and I’ll be sure to get a picture then. The ones I’ve still got on hand are pictured at right.

Finally, I started in on another pair of honeycomb mitts, using the burgundy and white yarn left over from my shawl. I made a couple of edits: instead of the single inkline, I’ve made a column of six TSS stitches in each row, and I distributed the increases and decreases evenly on both sides of this column rather than all on one side of the inkline. I like how they are turning out so far, both in terms of color and pattern. Photos:

I also finished the grey and tan silk-bamboo scarf I’ve been working on in the background; I’ve got a pattern written up and will get around to finishing and publishing it soon. I finished the blouse that I was muttering about a couple entries ago, although I don’t have pictures for you today. My other WIPs—the lace scarf and cashmere mitts—are still in progress, but haven’t come out of the protective wrappings I put them in for moving yet.

blouse_fabricOne final crafting-related activity to do with the move is that I’ve had to check out all my local craft stores. So far I’ve just hit the local incarnations of the big chains; I intended to just case the joint and come back when I actually needed something, but on all three excursions I came out with new materials. Between two fabric stores, I came out with fabric for three new blouses (pictured at right) and a pair of slacks. If you’re paying attention, you may have noticed I haven’t yet finished the Great Five-Blouse Project; the plan is actually to put off the last of those for a bit and assembly-line these three on the machine just to put some more options in my closet ASAP.

green_cream_yarnI also bought some new yarn at one of the fabric stores. Some is some cheap baby-sport yarn which will become a low-mental-energy crochet project and then a why-did-I-move-to-a-place-with-real-seasons-in-the-middle-of-winter blanket. The other is something I just thought was pretty and unusual—it appears to be a mesh of white cotton/acrylic threads caging a core of colorful wool fibers. So both a somewhat unusual blend of fibers and interesting from a mechanical perspective. It’s Patons “denim-y”, if you’re interested. I think it will become another two-tone scarf.

multi_threadFinally, at a non-fabric craft store I got a couple more colors of tatting thread. The bracelet I mentioned above being so beautiful came from a variegated colorway, so I’m going to experiment more with that. I’ve got a purple/lavender/white and a navy/denim/white multi.

Journal: 27 October 2014

It’s been a bit of a while since my last post, so I’ve got quite a lot of finished items to show you. The fabric I was excited about in my last journal entry is now an A-line knee-length skirt, the honeycomb mitts are finished along with a matching hat, and I’ve resumed the Great Five-Blouse Project. In the interstices of those projects I’ve also been making tatted bracelets, bringing my total up to five. The scarf I was working on in my last post is on hold—I finished off my yarn, but it is not yet a sufficient length, so on my next trip to the store I will need to get more.

Bracelets:

The crowns edging works very well for bracelets, although they are a bit wide, so I made a couple more in different colors, and I tried out the braid edging for a less ornate bracelet. I’m especially pleased with how the green one sits—it’s a larger thread than the other two, so I skipped one full pattern repeat and ended with a slightly snugger bracelet that sits happily at the narrowest part of my wrist.

Sewing:

Simple A-line skirt

Simple A-line skirt

The fabric I was talking about last time turned into a skirt in what I think is record time for me—I cut the fabric the afternoon/evening of my last journal post, and finished just at bedtime the following day. It’s entirely hand-stitched, too; having the nice sewing machine hasn’t spoiled me yet. It helps that it’s just about the simplest skirt you can imagine: a knee-length A-line skirt with no frills, although it does have a set-in-side zipper, an in-seam pocket on the other side, and a button and buttonhole tab on the waistband. I’m not entirely thrilled with it—I wasn’t paying enough attention to line up the pattern on the side seams, and the button/tab arrangement is a little hinky (I should probably move the button at some point)—but it will serve. I used the Simplicity 2758 D pattern, which I’ve used before (and more faithfully), but omitted the pleat and pockets and all.

Detail of button and tab

Detail of button and tab

I did find the perfect button for it—too bad I generally wear my shirts untucked, so the button will just about always be covered!

I don’t have any new photos of the Great Five-Blouse Project, but I’ve cut the pieces for the lavender blouse (#4) and started sewing the side seams. I’m planning to do the buttonholes at least by machine, and probably the hem and plackets as well, possibly in a decorative stitch. I started the seams by hand, though, because matching curved seams on the machine is hard and prone to puckers, so it’ll be an interesting hybrid of machine and hand sewing.

Mitts and hat

crossbones

Mitts and hat in Tunisian crochet

Well, I think I’ve gotten the Tunisian honeycomb bug out of my system at last. After finishing the mitts I had a fair bit of yarn left, so I decided to make a hat in the same style. I ended up a little short of the solid purple for a beanie, so it’s got a fairly wide shell edging in normal crochet. I’m not really a hats sort of person, so we’ll see how much I end up wearing it, but it’s quite comfy and promises to be warm. I’m planning to write up a proper pattern for both, so I’ll not say too much about the construction now, but here are a bunch of photos: